Getting Rid of Glass Stress Without the Headache Tempered glass is a bit of a wildcard. It holds onto internal stresses that, if you aren’t...

Getting IR Heating Right for Glass Silk-Screening When you’re trying to temper glass right after silk-screening, it’s all about the...

Getting Infrared Heat Right for Wide-Format Low-E Glass If you’re preheating Low-E glass, you know the drill: the heat has to be perfectly even...

Getting Your Glass Thermal Profiling Right Most off-the-shelf infrared lamps are designed to be uniform. They push out the same amount of heat across...

Cutting ultra-thick glass is a brutal process. There’s so much friction and stress involved that if you try to score it cold, your cutting...

Getting Glass Annealing Right with Shortwave IR If you’re tempering glass, you know the struggle. You need those thermal gradients to be spot...

Mixing silk-screen printing with glass tempering is basically a tug-of-war. On one side, you want the ink to stick perfectly. On the other, you’re...

Stop Fighting Your Glass Bead Oven If you’ve spent any time annealing glass beads, you know the frustration of “batch drift.” It’s...

Dealing with the Voltage Headache in Marine Glass Tempering When you’re tempering marine glass, you need a thermal profile that’s spot...

Getting the Heat Right for Train Window Glass When you’re annealing glass for a train window, you can’t just crank up the heat and hope...

Why we use Shortwave Infrared for Fiberglass Annealing Fiberglass lines move fast. Like, really fast. If you’re still relying on old-school...

Getting Your Glass Bending IR Lamps Right If you’ve ever dealt with stress fractures or weird optical distortions in your glass, you know the...

Why Fast-Response IR Lamps are a Lifesaver for Inline Glass Annealing In a glass plant, lag is the enemy. You can’t just wait around for a...

Getting Glass Tempering Right After Screen Printing Here is the tricky part about combining screen printing and tempering: you’re basically...

Why Fast-Response IR Lamps are the Secret to Non-Stop Glass Annealing If you’re running a glass line, you know the struggle. You have to get...

The Tug-of-War Between Ink and Strength Here is the problem when you’re trying to silk-screen print and temper glass at the same time:...

Getting Your IR Heating Right for Glass Silk-Screening When you’re trying to dry silk-screened ink right before tempering, you’re...

Stop the Chipping: A Better Way to Cut Quartz Glass Anyone who’s spent time cutting quartz glass knows the frustration. You make your score, you go...

Introduction Here’s the thing—we build glass tempering preheating lamps for engineers who crave control, not just a blast of heat. You need...

A Custom Shortwave Infrared Halogen Lamp, Built for One Tough Job We built this lamp for a very specific reason: to cure those thick, fire-retardant...

On the glass line, enamel drying is where you balance speed against scrap. Under-dry gives you uncured edges and adhesion failures. Over-dry?...

On the floor, seconds and kilowatt-hours add up fast. In tempering, bending, or lamination, uneven heat or a lagging ramp-up kills throughput and...

On the glass line, thin glass doesn’t forgive uneven heat. A cold spot during tempering or bending shows up as optical distortion, roller wave, or...

On the line, laminated glass adhesive curing is where cycle time, temperature uniformity, and repeatability make or break your yield. Under-cured PVB...

On the line, edge heating is where yield lives or dies. A cold spot along the bevel, a hot band that runs past the mark—either one seeds thermal...

Out on the line, the marver heating step is where the glass commits to its shape—and where a tiny temperature drift turns into scrap. Drop the lamp...

On the floor, heat isn’t a variable—it’s the lever that makes or breaks yield. One cold spot during bending, one overshoot in tempering, and the...

On the line, a tempering furnace doesn’t run on gut feeling. The moment glass comes out, the thermal stress has to be even, repeatable, and on spec....

Out on the plant floor, oven door seals on glass furnaces don’t fail with a bang. They fail with a cold spot, and when that happens, the...

On a high-speed bending line, heat isn’t just a setting—it is the process. When the tablet glass bending heater can’t keep up, you get uneven sag,...

On the line, that glass screen protector heater isn’t a luxury. It’s the difference between making good glass and paying for scrap. When...